Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista Home Basic, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3061 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 225602 MB, Free - 121863 MB; D: Total - 10239 MB, Free - 5502 MB;
Motherboard: Dell Inc., 0U990C
Antivirus: Microsoft Security Essentials, Updated and Enabled
I'm building a solar power system and wanting to network together 3 morningstar controllers, a relay device, and my computer. The diagram shows a morningstar RSC 1 adapter with a 232 cable hook up on one end of the adapter and the EIA 485 connections on the other. No problem. With the RSC 1 adapter for the computer I will make the EIA 485 connections on one end of the adapter, however do not want to have my computer physically present to use the 9 pin serial 232. How do I go wireless from the 232 port. Also, the RSC 1 shows that I need to have two 100 ohm resisters installed between the inner two wires on the EIA 485 wiring. Where do I install the resisters. Thanks in advance for your help.
OS Version: Microsoft® Windows Vista Home Basic, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3061 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 225602 MB, Free - 121863 MB; D: Total - 10239 MB, Free - 5502 MB;
Motherboard: Dell Inc., 0U990C
Antivirus: Microsoft Security Essentials, Updated and Enabled
I'm building a solar power system and wanting to network together 3 morningstar controllers, a relay device, and my computer. The diagram shows a morningstar RSC 1 adapter with a 232 cable hook up on one end of the adapter and the EIA 485 connections on the other. No problem. With the RSC 1 adapter for the computer I will make the EIA 485 connections on one end of the adapter, however do not want to have my computer physically present to use the 9 pin serial 232. How do I go wireless from the 232 port. Also, the RSC 1 shows that I need to have two 100 ohm resisters installed between the inner two wires on the EIA 485 wiring. Where do I install the resisters. Thanks in advance for your help.