Hello guys,
I have a Linksys E3000 gigabit router and a recently bought edimax gigabit router(before I had edimax 100mbit router) that connected with 100M CAT6 cable between them but it seems that the network is running in 10mbit instead of 1gbps.
the network start sometimes with 100mbit if I sync between them but after a while the Autonegotiation mechanism drops it to 10mbit.
when I had the 100mbit edimax things run smooth on 100mb in 95mbps transfer rate and now its stuck on 9.5mbps.
Ideas please...
Thanks.:up:
I have a Linksys E3000 gigabit router and a recently bought edimax gigabit router(before I had edimax 100mbit router) that connected with 100M CAT6 cable between them but it seems that the network is running in 10mbit instead of 1gbps.
the network start sometimes with 100mbit if I sync between them but after a while the Autonegotiation mechanism drops it to 10mbit.
when I had the 100mbit edimax things run smooth on 100mb in 95mbps transfer rate and now its stuck on 9.5mbps.
Ideas please...
Thanks.:up: